Furling Accessories

TSW Lead Block & Furling Line Kit (best for Profurl and CDI installations)

This kit includes furling line, 1 pulpit mounted ball bearing fairlead, 3-4 intermediate stanchion mount fairleads with stainless steel inserts, one deck mounted fairlead and a deck cleat. Also included is all necessary screws and hardware. This kit is recommended for most boats using CDI and Profurl units.

Kit
Fits Boats to
Furling
Line
Stanchion
Block
Rail Mount
Fairleads
Bullet
Failead
Cleat Size
TSW Price
Small*
25 feet & FF2
54' x 1/4"
1
3
1
4"
$199
Med.
30 feet
75' x 5/16"
1
4
1
5"
$269
Large
45 feet
90' x 5/16"
1
4
1
6"
$289
* Small kit is recommended for CDI FF2 regardless of boat length

7404 Harken Lead Block Kit Option
(best for Harken Unit installations)

Carbo Furling Lead Block Assemblies. These strong, lightweight blocks feature free-rolling ball bearings to lead line aft for safe furling from the cockpit.

This kit allows the furling line to be routed outside the stanchions to keep the sidedeck clear. Blocks mount with a strong four-screw clamp without removing the stanchion or lifelines. The cockpit ratchet block provides drag on the line when unfurling to control spooling so unit furls more evenly. The 7404 lead block kit provides a complete system for most boats (one size fits all).

Kit Includes:
• Stanchion mounted ball bearing lead blocks
• Hexratchet block adds drag to the furling line to help it wrap neatly
• Cleat for furling line. (Furling line is already included with Harken Furling Units so it is not supplied here).
Model
List
TSW Price
7404 LBK
$239
$215
Replacement Headstays for Catalina 22 and MacGregor 25 + 26 Classic

These common boats usually require headstay replacement when installing either Harken #00 or CDI FF2 Units. If the old headstay has a teardrop shaped thimble swaged at the bottom, it will not pass through the foil for installation. Therefore it must be cut or replaced. Our headstays have a marine style turnbuckle. When you remove the barrel the remaining screw is only 1/4” dia. so it is allowed to pass through easily.

These Pre-made Headstays are In Stock
Boat Pin to Pin TSW Price
Catalina 22 (pre 1987) 24'7" $104
MacGregor 25 24'7" $104
MacGregor 26 Classic 24' 3" $104
Wire diameter is 1/8” with 1/4” pins top and bottom . Toggle & turnbuckle are included.

Headstays are sold with furler purchase only.

Please order custom headstays by Phone
831-646-5346

Custom Replacement Headstays
Harken MKIV and Cruising Units will usually require shortening or replacing the headstay for installation because of the added length of the toggle at the bottom. Often customers will replace the headstay at that time, especially if the rigging is more that a few years old.

To replace your headstay when installing your new furler call us with your “pin to pin” dimension as described here. (The dimension between the center lines of the clevis pin holes at the mast head connection and the stem fitting at the bow of the boat (with turnbuckle in normal adjustment). Also provide wire diameter and pin sizes both top and bottom. Custom headstays take about 3 - 5 Days to make.

HOME | SEARCH | ORDER | CUSTOM SAILS | MEASURING SAILS

The Sail Warehouse

102 Aviation Lane Suite C, Monterey, CA 93940